logo

Detalles de los productos

Created with Pixso. Hogar Created with Pixso. Productos Created with Pixso.
Equipo de prueba del ingreso del agua
Created with Pixso.

Automated IPX3 IPX4 Waterproof Test Apparatus with Φ0.4mm Needle Hole and 0.07 L/min Water Flow for IEC 60529 Compliance

Automated IPX3 IPX4 Waterproof Test Apparatus with Φ0.4mm Needle Hole and 0.07 L/min Water Flow for IEC 60529 Compliance

Nombre De La Marca: Sinuo
Número De Modelo: SN444
Cuota De Producción: 1
Condiciones De Pago: T/T
Capacidad De Suministro: 10 conjuntos por mes
Información detallada
Lugar de origen:
Porcelana
Certificación:
Calibration Certificate (Cost Additional)
Agujero de aguja:
Φ0.4mm
Llover velocidad:
IPX3: 4 s/tiempo (2×120°); IPX4: 12 s/tiempo (2×360°);
Flujo de agua:
0.07 L/minX
Manómetro:
0~0.25MPa
Diámetro de la placa giratoria:
Φ600mm
Velocidad de rotación:
1r/min
Tiempo de prueba:
1-99999S se puede preestablecer
control electrico:
PLC y pantalla táctil
Detalles de empaquetado:
Embalaje de exportación
Capacidad de la fuente:
10 conjuntos por mes
Resaltar:

Φ0.4mm Needle Hole Waterproof Test Apparatus

,

0.07 L/min Water Flow Oscillating Tubes Test System

,

Φ600mm Turntable IPX3 IPX4 Test Equipment

Descripción del producto


 

IPX3 IPX4 Automated Oscillating Tubes Waterproof Test Apparatus IEC 60529

 

Complied Standards & Clauses


 

The SN444 IPX3~4 Oscillating Tubes Test System is a professional-grade waterproof testing solution developed in accordance with IEC60529:2013.


Product Overview


 

The IPX3~4 Oscillating Tubes Test System SN444 is a fully integrated waterproof testing solution designed according to IEC 60529:2013. Engineered for precision and repeatability, this system enables accurate evaluation of IPX3 and IPX4 water ingress protection levels for electrical and electronic products. It includes a complete set of oscillating tubes ranging from R200 to R1600, a durable turntable, and an intelligent water supply and control cabinet. Equipped with PLC control, frequency converter, and flow meter, the system ensures stable water flow and highly reliable test performance. With its modular structure, high automation, and wide test coverage, the SN444 is an ideal choice for laboratories, quality inspection centers, and manufacturers seeking consistent and compliant waterproof testing.

 

Technical Parameters


 

Power supply for sample AC220V, 10A
Site requirements

Dedicated IP waterproof test room, the ground should be flat with illumination.

10A waterproof leakage switch (or socket) used for equipment. With good function of inflow and drainage.

Ground installation.

Raining speed

IPX3:4s/time (2×120°);

IPX4:12s/time (2×360°);

The size of the oscillating tube Coming with R200mm,R400mm, R600mm, R800mm, R1000mm, R1200mm, R1400mm, R1600mm oscillating tubes, made of stainless steel
Needle hole Φ0.4mm
Included angle of two holes IPX3:120°; IPX4:180°
Electrical control

PLC & touch screen

Water flow Can be set according to the size of the oscillating and the number of the pin holes (0.07 L/minX per hole)
Testing time 1-99999S can be preset
Water supply

Water flow rate>10L/min±5% clean water without inclusion.

This device is equipped with clean water filtration unit

Turntable Diameter: Φ600mm, rotation speed: 1r/min, bearing capacity: ≤50kgs
Oscillating tube swing angle

Max. ±175° can be preset

(Note: standard requires IPX3:120°; IPX4:360°, but due to there is turntable under oscillating tube during test, so 360° can not achieved during actual testing, if without turntable, then 360° can be achieved)

Power supply for this equipment AC 380V, 50Hz, 4KW
Pressure gauge 0~0.25MPa

Details


 

Automated IPX3 IPX4 Waterproof Test Apparatus with Φ0.4mm Needle Hole and 0.07 L/min Water Flow for IEC 60529 Compliance 0 

 

 Automated IPX3 IPX4 Waterproof Test Apparatus with Φ0.4mm Needle Hole and 0.07 L/min Water Flow for IEC 60529 Compliance 1